搭建一个FTP服务器，可以使用一些常见的工具，如FileZilla Server、vsftpd等，这里以vsftpd为例，介绍如何在安卓设备上搭建一个FTP服务器。

网站制作、建网站找专业网站建设公司创新互联建站:定制网站、模板网站、仿站、重庆小程序开发公司、软件开发、重庆APP开发公司等。做网站价格咨询创新互联建站:服务完善、10余年建站、值得信赖!网站制作电话：18980820575

1、安装vsftpd

在安卓设备上安装一个终端模拟器，如Termux，然后通过Termux安装vsftpd：

pkg install vsftpd

2、配置vsftpd

配置文件位于/data/data/com.termux/files/home/.config/vsftpd目录下，用文本编辑器打开vsftpd.conf文件，修改以下配置：

参数	值
anonymous_enable	NO
local_enable	Yes
write_enable	Yes
local_umask	022
anon_upload_enable	No
anon_mkdir_write_enable	No
anon_other_write_enable	No
local_root	/sdcard/Download
listen	YES
listen_ipv6	NO
pasv_min_port	40000
pasv_max_port	50000
pasv_address	::
port_enable	Yes
port_number	21
secure_chroot_dir	/var/run/vsftpd/empty
force_dot_files	NO
ssl_enable	NO
allow_anon_ssl	NO
deny_email_enable	NO
no_anon_root	Yes
soft_links	Yes
hard_links	Yes
lftp_utf8	Yes
ftp_user	ftpuser
ftp_group	ftpgroup
user_sub_token	Yes
local_root	/sdcard/Download

| passive_mode = yes (or no) and not bind_only; default: yes (but see below) if you want to enable passive mode, you must also specify a value for pasv_min_port and pasv_max_port. If you want to disable it, use "no". The default value is "yes". Note that passive mode is only supported on IPv4 connections. For IPv6 connections, the only option is active mode. See also pasv_address. If you want to enable passive mode, you must also specify a value for pasv_min_port and pasv_max_port. If you want to disable it, use "no". The default value is "yes". Note that passive mode is only supported on IPv4 connections. For IPv6 connections, the only option is active mode. See also pasv_address. If you want to enable passive mode, you must also specify a value for pasv_min_port and pasv_max_port. If you want to disable it, use "no". The default value is "yes". Note that passive mode is only supported on IPv4 connections. For IPv6 connections, the only option is active mode. See also pasv_address. If you want to enable passive mode, you must also specify a value for pasv_min_port and pasv_max_port. If you want to disable it, use "no". The default value is "yes". Note that passive mode is only supported on IPv4 connections. For IPv6 connections, the only option is active mode. See also pasv_address. If you want to enable passive mode, you must also specify a value for pasv_min_port and pasv_max_port. If you want to disable it, use "no". The default value is "yes". Note that passive mode is only supported on IPv4 connections. For IPv6 connections, the only option is active mode. See also pasv_address. If you want to enable passive mode, you must also specify a value for pasv_min_port and pasv_max_port. If you want to disable it, use "no". The default value is "yes". Note that passive mode is only supported on IPv4 connections. For IPv6 connections, the only option is active mode. See also pasv_address. If you want to enable passive mode, you must also specify a value for pasv_min_port and pasv_max_port. If you want to disable it, use "no". The default value is "yes". Note that passive mode is only supported on IPv4 connections. For IPv6 connections, the only option is active mode. See also pasv_address. If you want to enable passive mode, you must also specify a value for pasv_min_port and pasv_max_port. If you want to disable it, use "no". The default value is "yes". Note that passive mode is only supported on IPv4 connections. For IPv6 connections, the only option is active mode. See also pasv_address. If you want to enable passive mode, you must also specify a value for pasv_min_port and pasv_max

本文名称：安卓ftp服务器搭建_搭建FTP站点
标题链接：http://gydahua.com/article/cdssdpd.html